Download  Print this page

Brother Sewing Machine Operation Manual Page 202

Computerized embroidery and sewing machine.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
Symptom
While winding the
bobbin, the
bobbin thread was
You have not wound the bobbin
wound below the
thread properly.
bobbin winder
seat.
The thread is not passed through
the bobbin-winding thread guide
correctly.
Bobbin thread
does not wind
Bobbin spins slowly.
neatly on the
bobbin.
The thread that was pulled out
was not wound onto the bobbin
correctly.
Fabric being sewn
with the machine
Thread is tangled below the
cannot be
needle plate.
removed.
The fabric feeds in
the opposite
The feed mechanism is damaged.
direction.
The upper thread
The bobbin thread is incorrectly
has tightened up.
installed.
The thread is
tangled on the
You have not threaded the upper
wrong side of the
thread properly.
fabric.
200
Probable Cause
Remedy
After removing the thread wound
below the bobbin winder seat, wind
the bobbin correctly.
Correctly pass the thread through the
bobbin-winding thread guide.
Move the sewing speed controller to
the right (so that the speed will be
fast).
Wind the thread that was pulled off
round the bobbin five or six times
clockwise.
Lift up the fabric and cut the threads
below it, and clean the race.
Contact your dealer or the nearest
authorized service center.
Correctly install the bobbin thread.
Correct the upper threading.
Reference
page 193
page 27
page 28
page 28
page 190
page 29,
page 186
page 32,
page 187

Advertisement

Table of Contents

   Also See for Brother Sewing Machine

   Related Manuals for Brother Sewing Machine

This manual is also suitable for:

Nv1250d

Comments to this Manuals

Symbols: 0
Latest comments: