— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Select the stitch type.
When a decorative stitch is selected
The screen containing the various stitches in
the selected stitch type appears.
• To select a different stitch type, press
Press the stitch selection.
(Previous page key) displays the previous
(Next page key) displays the
a Decorative stitch selection
b Set width, length and tension
c Large pattern size
d Small pattern size
e Single stitch sewing
f Repeat sewing
g Horizontal mirror image
h Delete a selected pattern
i Check combined pattern
j Automatic thread cutting
k Automatic reverse/reinforcement stitch
• To select a different stitch, press
remove the selected pattern.
If necessary, specify the setting for automatic
reverse/reinforcement stitching and adjust the
stitch length, etc.
• For details on sewing with each of the utility
stitches, begin on page 81.
When a stitch is selected, the icon for the
presser foot that should be used appears on
the screen. Check that the correct presser
foot is attached before starting to sew. If the
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.
For details on adjusting the stitch width and
length, refer to "Adjusting the stitch width"
(page 58) and "Adjusting the stitch length"
■ Selecting characters
Three styles of character stitches are available.
The procedure for selecting a character is the
same with all styles.
(page 77) to display the screen where a stitch
type can be selected.
Select the character style.
Select the characters.
• If a wrong character was selected, press
to erase the character, and then select the
• To select a different character style, press
, and then select the new character style.
to view a sample of the selected
• To enter a space, press "_".
in "Selecting stitching"