3. Wiring connection
Remove the electrical cover of outdoor unit (1 screw).
Connect wires as shown below in the illustrations.
Heat Pump
Connect to Power Supply
Power supply inter connecting
conductors (in conduit A)
(to the indoor unit)
Control inter connecting
conductors (in conduit B)
(to the indoor unit)
The conduit should not be loosened after being fixed, otherwise, it may cause abnormal noise when the
u n i t i s r u n n i n g .
Number 14 wire should be used for KFR-18GW.
Number 12wire should be used for KFR-24GW. KFR-18GW/(D)
Number 14 wire should be used for KFR-09GW. KFS-12GW. KFR-12GW/(D)
Number 16 wire should be used for KFR-12GW.
Outdoor unit terminal block
- 2 2 -