Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Water is dripping inside the room
Water collects in the base pan
Unit turns off automatically, code
"FL" displays on the control panel
The Remote Control is not working
Our units use the latest heat pump technology on the marketplace. Heat pump technology is the most efficient in heat
mode above 30°F degrees. Heat pump technology does not work as efficiently on temperatures below 30°F , it is
recommended to use auxiliary heat from central air or a space heater.
WIRING DIAGRAM
POSSIBLE CAUSES
The air conditioner is not
correctly tilted towards the
outside
The drain plug is unplugged.
Moisture removed from the
air is draining into the base
pan
Internal water bucket is full
The batteries are inserted
incorrectly or the batteries
may be dead
SOLUTIONS
·
For proper water drainage, make
sure the air conditioner is slightly
tilted downward from the front of
the unit to the rear.
Firmly press on the drain plug at
·
the front, bottom-left side of the
unit.
This is normal for a short period in
·
areas with low humidity and nor-
mal for a longer period in areas
with high humidity.
Use the front, bottom-left side drain
·
port to empty the water and the unit
will turn back on.
Check the position of the batter-
·
ies.
Replace the batteries
·
<
Advertisement
Table of Contents
