1. Product Description The Avantree Vox-pop is a new Bluetooth mono headset from the Avantree family. It delivers clear transmission with voice prompts and high quality sound. With Multipoint Technology, your headset seamlessly transforms into a powerful communication solution for up to two Bluetooth devices. The Avantree Vox-pop is...
2). Multi-function button (MFB) 3). Volume up button 4). Volume down button 5). LED indicator 6). Ear hook 7). Earphone 8). Main microphone What’s in the box: A. Avantree Vox-pop headset B. USB charging cable C. Ear hook D. 2 silicone ear buds...
Page 4
3). LED will indicate red during charging and off when charging is complete. 4). If you have not used your Avantree Vox-pop for a few months, LED might not turn red when first charging. It might take 15-35 minutes before the LED will come on.
Page 5
A. Ensure the headset is off. B. Press and hold the multi-function button for about 7 seconds until LED blinks blue and red alternately, and you will hear “Paring”. C. Search the device from your phone / PC. D. Once the “Oritone Drivo‟‟ is found, follow the steps and enter pin code 0000 to pair if needed, most phones don‟t need this pin code.
5. Basic Operations Headset on/off Turn on – Press and hold the MFB for 3 seconds until blue LED flashes 3 times and you will hear “Power On”. Turn off – Press and hold the MFB for 3 seconds until red LED flashes twice and you will hear “Power Off”.
Page 7
Voice dialing Please check if your mobile phone supports a voice dialing function. If your phone does support this function, follow your mobile phone manual instructions to set it up. 1). Press the MFB briefly, then you can hear a short beep. 2).
Page 8
5.11 Switch between 2 phone calls When having 2 calls on the line, press “V+” button for about 2 seconds. You will hear a beep to switch between the 2 phone calls. When having 2 calls on the line, quickly press the “MFB” button once to end the current call, then press “V+”...
Last number redialing When the headset is connected with two Bluetooth mobile phones, quickly press MFB button twice – the last dialed number on the second phone will be re-dialed. NOTE: When connected to two Bluetooth mobile phones at the same time, when one phone is on a call, the other phone keeps its connection with the headset.
* Dimensions: 50mm x 23mm x 16mm * Weight: 7.3g The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles and environments. 8. Safety Information To avoid damage or malfunction of this device, do not drop it from high places. ...
Use only the correct charger as supplied with this device. Replacement or service must be done by a qualified service center or by the manufacturer. Unplug this device when unused for long periods, or during lightning storms. CAUTION: ELECTRIC SHOCK HAZARD The battery in this device may present a risk of fire or chemical burning if mistreated.
Page 12
• This device must accept any interference received, including interference that may cause undesired operation. 2). Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 9.3. RF Warning Statement The device has been evaluated to meet general RF exposure requirement.
Page 13
Consult the dealer or an experienced radio/TV technician for help. 9.4. Trademark Statement The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Avantree is a trademark owned by Avantronics Limited. 10. Warranty Please refer to the warranty card included.
Page 14
„Product Tutorial‟ and „Download‟ pages. Due to the nature of our products, there may be software updates made without notice. Please always refer to the Avantree website for the latest information. QDID: B015071 FCC ID: WJ5-4GAH381...
Need help?
Do you have a question about the Vox-pop and is the answer not in the manual?
Questions and answers