Download Print this page

Avantree Clipper User Manual

Download this manual

Product overview

NOTE: All accessories are also available on avantree.com

2. Turning ON/OFF

2.1 To turn on the Clipper

Press and hold the "MFB" button for4 seconds and the LED light flashes blue.

2.2 To turn off the Clipper

Press and hold the "MFB" button for 4 seconds and the LED indicator flashes red.

3. Paring and connecting

Do you have a question about the Clipper and is the answer not in the manual?

Page 1: Product Overview
Product overview NOTE: All accessories are also available on avantree.com 2. Turning ON/OFF 2.1 To turn on the Clipper Press and hold the “MFB” button for4 seconds and the LED light flashes blue. 2.2 To turn off the Clipper Press and hold the “MFB” button for 4 seconds and the LED indicator flashes red.
Page 2 STEP 3 Activate Bluetooth on your phone and select “Avantree Clipper”. Note: Reconnect Whenever you turn Clipper on again it will be automatically reconnect to your phone. Otherwise, please press MFB button once to reconnect them. 3.2 Connect with PC/notebook STEP 1 Ensure Clipper is off.
Page 3 Note: ----Some functions may not work when used with different mobile phones or other compatible Bluetooth devices. 6. How to restore Clipper to Default Settings Under standby mode, press and hold “V+” and “V-” button for 7 seconds until the indicator flashes blue and red.
Page 4 USB port. It normally takes about 2 hours to fully charge the battery. The LED will stay red when charging and will turn off when charging is complete. Charging Requirements: You can plug our supplied USB cable to your own USB chargers (wall charger/travel charger/car charger, etc.) with 5V/500mA-1A or PC USB port.