Pipe Length Between Outdoor Units - LG Multi V Plus II System Installation Manual

Refrigerant piping installation
12. Always insulate the piping properly. Insufficient insulation will result in a decline in heating/cooling perfor-
mance, drip of condensate and other such problems.
13. When connecting the refrigerant piping, make sure the service valves of the Outdoor Unit is completely
closed (the factory setting) and do not operate it until the refrigerant piping for the Outdoor and Indoor
Units has been connected, a refrigerant leakage test has been performed and the evacuation process
has been completed.
14. Always use a non-oxidizing brazing material for brazing the parts and do not use flux. If not, oxidized film
can cause clogging or damage to the compressor unit and flux can harm the copper piping or refrigerant
oil.
WARNING
When installing and moving the air conditioner to another site, be sure to make recharge refrigerant
after perfect evacuation.
- If a different refrigerant or air is mixed with the original refrigerant, the refrigerant cycle may malfunction and
the unit may be damaged.
- After selecting diameter of the refrigerant pipe to suit total capacity of the indoor unit connected after
branching, use an appropriate branch pipe set according to the pipe diameter of the indoor unit and the
installation pipe drawing.

Pipe length between Outdoor Units

(Gas pipe, Liquid pipe, High/Low Pressure Common pipe)
= Product length + ∑ Max.10 (distance between Outdoor Units)
Product length
Product length
28 Outdoor Unit
Max. 10
Distance between Outdoor Units
Max. 10
Distance between Outdoor Units
Unit: mm