SoftBank 842P User Manual page 18

Parts
Camera panel
Keypad
One-push Open Button
Metal part of One-push Open Button
External Port cover
microSD Card Slot cover
Charging Terminals
Stop pads
Screws (Battery compartment)
Metal strips with raised dots
(Battery compartment)
Battery compartment
Battery compartment (Sides)
Battery terminals
Battery
Battery
Terminals
xvi
Materials/Surface Finish
Base: PET resin
Lens portion: Acrylic resin/
Hard coating
Acrylic Urethane resin
PC resin
Aluminium/Alumite treatment
Elastomer resin
PC resin, Elastomer resin/
Acrylic UV cured coating
Beryllium copper/
Gold plating on nickel plating
ABS resin
Aluminium killed steel/
Nickel plating
Stainless steel
Stainless steel/PET resin
PC resin
Titanium copper/
Gold plating on nickel plating
PC resin (Label: PET resin)
Glass fiber reinforced epoxy/
Gold plating on nickel plating
Charger (sold separately)
Do not cover or wrap charger during charging.
May cause overheating, fire or malfunction.
Always use the specified power supply/voltage.
Using incorrect voltage may cause fire or malfunction.
AC Charger: AC 100 V - 240 V (household AC outlet only)
In-Car Charger: DC 12 V, 24 V (vehicles with a negative earth
only)
Use In-Car Charger in vehicles with a negative (-) earth.
Do not use In-Car Charger if vehicle has a positive (+)
earth.
May cause fire.
Do not use charger in thunderstorms.
There is a risk of suffering electric shock.
Do not handle charger with wet hands.
May cause electric shock or malfunction.
If In-Car Charger fuse blows, always replace it with
specified fuse.
Using the incorrect fuse may cause fire or malfunction. Refer to
the respective manuals for information on the correct fuse
specifications.
If dust accumulates on plug, unplug charger and wipe
with a dry cloth.
May cause fire.
Warning Warning