Usim Card Installation; Usim Pins - SoftBank 842P User Manual

USIM Card Installation

Z
Remove battery ( P.1-12) then follow steps below.
Inserting
With IC chip down, insert USIM Card
1
Removing
1 Slide out USIM Card gently
Note
Do not force USIM Card into or out of handset; may damage handset/
USIM Card.
Be careful not to lose the removed USIM Card.
Avoid touching USIM Card terminals or IC chip; doing so may hinder
performance/USIM Card recognition.

USIM PINs

There are two USIM Card security codes: PIN & PIN2
PIN and PIN2 are set to 9999 by default.
PIN/PIN2 can be changed (
4 to 8-digit code used to prevent unauthorized handset use.
PIN
Required to clear call times/costs or set maximum cost
PIN2
(
Notch Notch
PIN Lock & Cancellation (PUK/PUK2)
PIN Lock or PIN2 Lock is activated if PIN or PIN2 is incorrectly entered
three times. Cancel PIN Lock or PIN2 Lock by entering the PIN Unblocking
Key (PUK/PUK2) (
For information on PUK/PUK2, contact SoftBank Mobile Customer
Center, General Information (
Note
If PUK/PUK2 is incorrectly entered ten times, USIM Card is locked and
handset is disabled. Write down PUK/PUK2.
For procedures required to unlock USIM Card, contact SoftBank Mobile
Customer Center, General Information (
Z
P.12-3).
When PIN Authentication is ON (
is required each time handset is turned on (with USIM
Card inserted).
Z
P.17-8).
Z
P.12-3).
Z
P.18-33).
Z
P.18-33).
1
Z
P.12-2), PIN entry
1-3