• Computer: Windows® XP Compatible PC working knowledge of your audio software. equipped with an IEEE 1394/FireWire Port Be sure to check the TASCAM web site at • Minimum: Pentium®, Celeron®, or Pentium® www.tascam.com and ensure you have the latest compatible processor 1.5GHz or higher...
1. Make the connections as described above. 1. Connect one end of the provided FireWire 2. Power up the Mac cable to the IF-FW/DM and the other end to an 3. Power up the DM-24 available FireWire port on your computer.
Page 4
Device Manager. On the CD-ROM that came will appear, click Next. Leave the selection on with your IF-FW/DM is a PC Drivers installer. the default setting of "Install the software auto- Launch it from the CD or copy it to your hard matically (recommended)".
Page 5
1. Under the Setup menu, select Configure Audio Inputs and Outputs System > Configure Hardware Driver 3. Click the General tab and select IF-FW/DM 2. Highlight the IF-FW/DM to make it the select- devices for the Playback and Record Timing ed Core Audio device for DP. Masters 3.
Page 6
Mixer Outputs By default, the DM-24 duplicates busses 1 - 8 on IF-FW/DM mixer outputs 1 - 8, 9 - 16, and 17 - Also available are the Direct Outputs from chan- nels 1 - 16 on the DM-24. By default, those...
Page 7
Setup IF-FW/DM Control Panel (Windows) The IF-FW/DM Control Panel is found here: Start Menu > All Programs > TASCAM > IFFWDM Control Panel. The three sliders are: Stream buffer depth Use this slider to control the size of the incoming 1394 audio stream.