Assembly Instructions - Kärcher HD 4.0/36 P Operator's Manual

ASSEMBLY INSTRUCTIONS

Attach the handle to the frame of the
pressure washer. Align holes, insert bolts,
and tighten with knobs.
Attach the gun/hose storage handle.
Place the quick connect nozzles in the
nozzle holder.
Attach the wand to the spray gun.
Pull the spring-loaded collar of the wand back
to insert your choice of quick connect nozzle.
Release the collar and push the nozzle until
the collar clicks.
DANGER
High pressure in nozzle area.
Risk of injury caused by improper locked
nozzle.
• Make sure you hear a 'click' when inserting
the nozzle tip into the wand.
• Pull the nozzle to make sure it is seated
properly before operating your unit.
Attach the high pressure hose to the spray
gun.
Prior to initial startup, cut off tip of oil reservior
cap.
5