Compal notebook User Manual page 142

8 The BIOS Setup Program
8.2.1 Accessing the BIOS Setup Program
To access the BIOS Setup program, press the [F2] key as soon as the computer starts upTthe
Phoenix BIOS screen displays.
Main Advanced
System Time:
System Date:
Hard Disk:
Quiet Boot:
System Memory:
Extended Memory:
BIOS Version:
Language:
F1 Help
Esc Exit
The Menu Bar
The top of the Setup screen has a menu bar with the following selections:
Main
Advanced
Security
TPM State
Boot
Exit
8-3
Phoenix TrustedCore(tm) Setup Utility
Security
[19:34:35]
[01/01/2005]
Hard Disk Model Name
[Enabled]
640 KB
1022 MB
XXXXX
[English (US)]
↑↓ Select Item
F5/F6 Change Values
←→ Select Menu
Enter Select 4 Sub-Menu
Allows the user to configure standard IBM PC AT system parameters.
Allows the user to configure advanced system settings.
Allows the user to configure security system settings.
Allows the user to configure TPM settings.
Allows the user to specify the order in which the notebook is to check
for a device to boot the system.
Allows the user to save CMOS setting and exit the Setup program.
TPM State(*) Boot Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F9 Setup Defaults
F10 Save and Exit