Galaxy A16F-R2431 Installation and Hardware Reference Manual
Step 4.
Step 5.
Step 6.
5-14
Figure 5-12: Removing the PSU Retention Screw
Remove the PSU by grabbing the extraction handle and
pulling the handle upwards. The extraction handle should
gracefully disconnect the PSU from the backplane
connectors. Once dislodged, gently pull the PSU out of the
subsystem. If the subsystem is mounted in a rackmount rack,
use another hand to support its weight while removing the
module. (See Figure 5-13)
Figure 5-13: Removing the PSU Module
Use the handle to gently pull the PSU out of the chassis.
Remove the cooling module from the upper level of the
PSU. Please refer to Section 5.6.
Replacing a Faulty PSU