Installation; Hardware Installation - LG GSA-5120D Owner's Manual

Installation

Hardware Installation

Connecting to computer
ON OFF
OR
NOTES
• Please do not turn off the drive while the computer is searching for the drive.
If you turn off the drive, normal operation of the computer will not be possible.
• Please do not connect the AC adapter and USB 2.0 converter cable by any means other
than specified above.
NOTES
• Make sure you have a personal computer with
• You cannot use the FireWire [IEEE 1394] and
• Power for all device should be turn off before
Connect the drive to the computer as shown in
figure.
1. Connect the USB converter cable [or IEEE
To AC wall
outlet.
2. Connect the other end of the USB converter
3. Connect the AC adapter plug to the power
4. When the computer is ready, confirm that the
6
an open USB port or IEEE 1394 port before
connecting the drive to your computer.
USB interfaces simultaneously.
attaching the cables.
1394 cable] to the External Super Multi DVD
Rewriter.
cable [or IEEE 1394 cable] to your computer.
connector at the rear of the drive.
Attach the AC adapter to the AC wall outlet.
drive is detected. And then, insert the supplied
software CD into the External Super Multi
DVD Rewriter and install the software.