Kodak EasyShare EX1011 User Manual page 46

Troubleshooting and support
Screen message
Printing error.
Time out occurred while printing.
Unable to create file. Device write
protected or full.
Disk full.
Unable to get dynamically
assigned IP address.
Verify network settings.
Verify security code.
Write failed. Select another
location.
40
Try one or more of the following
■
Make sure your printer is on and the USB cable is
securely connected
■
Check your printer for more info.
■
Check cables and printer supplies. Print again.
The frame was unable to copy the picture.
■
Insert a different card or device
the picture location setting
■
Remove write protection, unlock card.
■
Delete pictures from card.
DHCP (see Glossary) is not enabled at the router.
■
Make sure your router is properly configured and
DHCP is enabled.
■
Contact your system administrator or the person who
set up your wireless network.
■
Contact your system administrator or the person who
set up your wireless network.
You have network security turned on.
■
Enter the security code you created when you set up
your wireless network.
■
Contact your system administrator or the person who
set up your wireless network.
The frame was unable to copy the picture.
■
Insert a different card or device
the picture location setting
(page 13).
(page
(page 8).
(page
(page 8).
www.kodak.com/go/support
5), or change
5), or change