Kodak EasyShare M820 Extended User Manual
Digital frame
Hide thumbs
Also See for EasyShare M820:
- User manual (36 pages) ,
- User manual (29 pages) ,
- User manual (29 pages)
Related Manuals for Kodak EasyShare M820
Summary of Contents for Kodak EasyShare M820
- Page 1 Kodak EasyShare M820/M1020 digital frame Extended user guide www.kodak.com For help with your picture frame, www.kodak.com/go/digitalframesupport...
- Page 2 Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2008 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark. P/N 4F8175_en...
-
Page 3: Front View
5 Raised guide NOTE: When screen icons appear, Lights turn on at touch-sensitive points near the raised guide. To use the touch border, see page 3. Back/Right View 1 Audio In 2 Audio Out 3 DC-In (12V) 4 Speakers (2) www.kodak.com/go/support... - Page 4 1 Power button Volume button 2 Wall mounting holes Memory card slot - CF, MD 3 Rotating/extending stand (see page 1) 7 USB connector (to camera/USB device) 4 Memory card slot - SD, MMC, MS, xD 8 USB connector (to computer) www.kodak.com/go/support...
-
Page 5: Table Of Contents
Copying on your frame ................16 Copying between your frame and computer..........17 Deleting pictures ..................20 Selecting multiple pictures................20 4 Changing settings and more ...............22 Changing frame settings ................22 Settings menus ................... 22 Setting the clock and timer................25 www.kodak.com/go/support... - Page 6 Picture frame/computer communications ............. 30 Screen messages..................31 6 Appendix .....................33 Digital frame specifications................33 Important safety instructions ............... 35 Upgrading your software and firmware............35 Additional care and maintenance ..............36 Limited warranty ..................36 FCC compliance and advisory ..............38 www.kodak.com/go/support...
-
Page 7: Getting Started
Getting started Welcome to your Kodak EasyShare M820/M1020 digital frame. Viewing your pictures couldn’t be simpler! Setting up your frame Setting up the stand Your frame displays pictures in landscape orientation. To change to portrait orientation, see page Stand (pull to adjust the frame angle) -
Page 8: Turning On Your Frame
Do not use this power cable with other devices, including digital cameras. Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. Turning on your frame Power button - press and hold (for about 2 seconds), then release www.kodak.com/go/support... -
Page 9: Using Your Frame's Touch Border
(Slider): Under slider, slide, or touch and hold (for about 3 seconds to scroll even faster through your images), or tap slider arrows. Tap Menu for more options, or tap to resume a slide show. If the icons disappear, tap the bottom or right border. www.kodak.com/go/support... -
Page 10: Setting Your Language
Access them on My Frame (see page 8), then see page 20 to delete them. If you are at the Home screen, see page 8 to start your slide show. To change the slide show order, see page www.kodak.com/go/support... -
Page 11: Inserting A Memory Card
Connecting a digital camera or other USB device USB cable included with your USB device USB devices: camera, flash drive, card reader, computer, etc. (sold separately) USB cable to computer (sold separately) www.kodak.com/go/support... -
Page 12: Turning Off Your Frame
2 Slide to highlight (Viewing options), then tap 3 Slide to highlight Frame orientation, then tap OK. 4 Slide to highlight Portrait, then tap OK 5 Tap to exit. Your frame is set up now to display pictures in portrait orientation. www.kodak.com/go/support... -
Page 13: Mounting Your Frame On The Wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your wall. Clip (use to reroute, secure, and Wall mounting holes center the power cable) Power cable To change to portrait orientation, turn your frame 90° and use the wall mounting holes at the top. www.kodak.com/go/support... -
Page 14: Viewing Pictures
Settings—customize your frame settings. For example; set slide show durations and transitions, set viewing options, screen brightness, clock, and timer. See page My Slide show—appears when you save a slide show you are viewing for quick access anytime (see page www.kodak.com/go/support... -
Page 15: Running A Slide Show
Tap the touch-sensitive border to pause your slide show and to display the screen icons. → → (Viewing Options) Save as My Slide show OK. Tap Yes to confirm. NOTE: The saved slide show appears on the Pictures and Videos screen as a picture source (see page www.kodak.com/go/support... -
Page 16: Viewing Thumbnails (Multi-Up)
(Zoom). Slide from left to right under the zoom bar to magnify the picture. To view other parts of the picture, tap . To return to 1X, slide from right to left. To rotate a picture, tap (Menu), then tap (Rotate). www.kodak.com/go/support... -
Page 17: Viewing Pictures By Filename
20), then tap OK. 2 Tap (Viewing Options). 3 Highlight Sort, then tap OK. 4 Select a sort order: -Date, oldest to newest (default) -Date, newest to oldest -Filename, A - Z -Filename, Z - A 5 Tap OK. www.kodak.com/go/support... -
Page 18: Doing More With Your Frame
-For copying, highlight the source you want to copy to, then tap OK. -For deleting, tap Yes to confirm. To copy music files (MP3) to internal memory, drag and drop them from your computer. See Copying pictures to/from your computer, page www.kodak.com/go/support... -
Page 19: Playing A Video
Videos in thumbnail view: – MOV videos are indicated with – AVI, MPEG, and MPG videos display the first frame. Video control buttons: play, pause, and resume the video. rewind / fast forward. stop the video and return to thumbnails. www.kodak.com/go/support... -
Page 20: Printing Pictures
(Menu). If you selected multiple pictures to print, they appear on the screen. (Print), then Yes to start printing. NOTE: Remember to change your connection mode back to Computer when you are done (see page 15). www.kodak.com/go/support... - Page 21 4 Slide to highlight Device configuration, then tap OK. 5 Highlight USB connection mode, then tap OK. 6 Slide to highlight the mode you want to connect to, printer or computer, then tap 7 Reconnect the device (printer or computer) that matches the connection mode. www.kodak.com/go/support...
-
Page 22: Copying On Your Frame
10). 2 Tap (Menu). 3 Tap (Copy), then OK. 4 Tap the available destination you want to copy to, then tap OK. The picture is copied. 5 Tap (Close) to close the menu. To copy multiple pictures, see page www.kodak.com/go/support... -
Page 23: Copying Between Your Frame And Computer
(see page 17). 3 Double-click (Kodak EasyShare digital display software icon) on your desktop to open the software. The frame, memory card, and connected devices appear in the Drag and Drop Zone. www.kodak.com/go/support... - Page 24 NOTE: The slide show order of play for available sources is: memory card, USB device, internal memory. NOTE: To maintain the slide show order during playback, see page 11 and select Filename, A - Z. www.kodak.com/go/support...
-
Page 25: Copying Pictures From Easyshare Software
7 Click Copy. Pictures are copied to your frame. 8 Unplug the USB cable, then go to the copy location (see page 8) to view your copied pictures on your frame and to play a slide show. www.kodak.com/go/support... -
Page 26: Deleting Pictures
1 In multi-up (thumbnails) view, slide or tap below the slider arrows to find a picture, then tap (Select). A check mark appears on the selected picture. 2 Continue selecting pictures. To remove a check mark, tap (Unselect) while the picture is highlighted. www.kodak.com/go/support... - Page 27 Doing more with your frame Select/Unselect all Select all In thumbnails view (page 10), tap (Select All). Unselect all To remove all check marks, tap Unselect All. www.kodak.com/go/support...
-
Page 28: Changing Settings And More
Upgrade firmware—load the latest version of firmware on your frame (page 26). This option is only displayed if the upgrade file (.img) is Exit—return to the Home screen. available on the frame (memory card, flash drive, internal memory, etc.). www.kodak.com/go/support... - Page 29 Play video soundtrack. Music stops playing while the video, with audio, plays. Clock and timer On/Off schedule—set your frame to turn on and off at a specified time every day (page 25). Set time—manually set the clock to the current time (page 25). www.kodak.com/go/support...
- Page 30 Choose your language (page Automatic resizing Choose to turn on or off automatic resizing of your pictures when copying. Full resolution is unnecessary and quickly fills up the frame’s memory. About Check your frame model, serial number, and firmware version. www.kodak.com/go/support...
-
Page 31: Setting The Clock And Timer
If your frame loses power, the clock time returns to the factory setting and the automatic on/off times, if set, are disabled. To reset the clock and re-enable your on/off times, see Resetting the clock after losing power, page www.kodak.com/go/support... -
Page 32: Upgrading Your Firmware
Changing settings and more Upgrading your firmware Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to www.kodak.com/go/digitalframedownloads. -
Page 33: Installing The Software
Installing the software Follow these directions to install the software CD that was packaged with your frame. The CD contains the Kodak EasyShare software and the Kodak EasyShare digital display software. While these software applications work well independently, both applications work together for the best experience when working with your pictures... -
Page 34: Customizing Your Frame
Gently wipe the frame, LCD, or matte with a clean, dry, lint-free cloth (included). For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates and custom mattes www.kodak.com/go/digitalframesupport... -
Page 35: Troubleshooting And Support
Troubleshooting and support For step-by-step product support, visit www.kodak.com/go/digitalframesupport select Interactive Troubleshooting & Repairs. Picture frame problems If... Try one or more of the following Frame does not Make sure the power cable that was included with your frame is... -
Page 36: Picture Frame/Computer Communications
Cannot copy pictures to my Make sure your computer is on. computer. Make sure the USB cable is securely connected (page 17). Cannot see my frame as a Make sure the power button on the frame is On (page ii). removable drive. www.kodak.com/go/support... -
Page 37: Screen Messages
If... Try one or more of the following Cannot copy pictures from Make sure your frame and computer are on. Kodak EasyShare software. Make sure the USB cable is securely connected (page 17). Make sure to install the software that was packaged with... - Page 38 (for about 2 seconds), then release . If directory. the problem persists, contact customer support help, Error duplicate filename. www.kodak.com/go/digitalframesupport Error occurred while closing a file. Error invalid filename Error reading from file. Error writing from file.
-
Page 39: Appendix
Appendix Digital frame specifications For more specifications, visit www.kodak.com/go/digitalframesupport. Kodak EasyShare M820/M1020 digital frame Color display M820 20.3 cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 4:3 or 16:9 aspect ratio, 17.6 x 10 cm (6.9 x 3.9 in.) viewable area M1020 25.4 cm (10 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect ratio,... - Page 40 F (-20 to 60 ° ° Storage: -22 to 185 F (-30 to 85 Size M820: 28.5 x 21 x 3.8 cm (11.2 x 8.3 x 1.5 in.) M1020: 33 x 24 x 3.8 cm (13 x 9.5 x 1.5 in.) www.kodak.com/go/support...
-
Page 41: Important Safety Instructions
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak/go/accessories. -
Page 42: Additional Care And Maintenance
If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid. -
Page 43: Your Rights
(such as third party ink or ink tanks), failure to follow Kodak 's operation, maintenance or repacking instructions, failure to use items supplied by Kodak (such as adapters and cables), or claims made after the duration of this warranty. -
Page 44: Fcc Compliance And Advisory
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act. -
Page 45: Fcc And Industry Canada
(2) this device must accept any interference received, including interference that may cause undesired operation. Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. -
Page 46: Waste Electrical And Electronic Equipment Labeling
N137 MPEG-4 Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use by a consumer engaging in personal and non-commercial activities. Russian GOST-R Eastman Kodak Company Rochester, New York 14650 www.kodak.com/go/support... - Page 47 China RoHS Korean Class B ITE Licensing Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications www.kodak.com/go/support...
- Page 48 (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is required. For details, please visit http://mp3licensing.com. www.kodak.com/go/support...
- Page 49 30 to/from computer, USB, 17 frame, 29 home changing picture locations, 8 deleting pictures and videos, 20 screen, 8 displaying slide show, 9 disposal, recycling, 36 doing more with your frame, 12 installing software, 27 internal memory www.kodak.com/go/support...
- Page 50 13 installing, 27 portrait, set orientation, 23 upgrading, 35 power source, picture location, 8 specifications, 33 specifications, frame, 33 turning on, 6 stop printer connection mode, 15 video, 13 printing, PictBridge printer, 14 storage capacity, internal memory, 33 www.kodak.com/go/support...
- Page 51 23 troubleshooting error messages, 31 frame, 29 turning on/off frame, 6 upgrading firmware, 22 software and firmware, 35 USB connection mode, 15 USB device, connecting, 5 viewing full screen picture, 10 pictures/videos, 8 thumbnails, 10 warranty, 36 www.kodak.com/go/support...
Need help?
Do you have a question about the EasyShare M820 and is the answer not in the manual?
Questions and answers