Printing Pictures - Kodak EasyShare EX1011 User Manual

Printing pictures

Your frame is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers.
NOTE: Printing from the Gallery
Preparing the frame and printer for printing
Printing to a PictBridge enabled printer
3 Highlight Print, press OK, then highlight Print again, and press OK
The picture is printed. To print multiple pictures, see
4 Change your connection mode back to Connect to computer. See
changing USB connection mode, page
www.kodak.com/go/support
(page 26) is not currently supported.
1 Make sure your frame is disconnected from the
printer.
2 On the frame, change your connection mode from
computer to printer. See
connection mode, page
3 Turn off the frame and printer.
4 Connect the USB cable (included with your frame)
from the frame to the printer.
1 Turn on the printer. Turn on the frame.
2 If you are in a slide show or single view, press
If you are in thumbnails view, press
picture, then press
14.
Doing more with your frame
Manually changing USB
14.
.
page 17.
Manually
.
to find a
13