7
Troubleshooting
Camera problems
Status
Camera does not
turn on or off
Camera buttons and
controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture
Pictures remaining
number does not
decrease after taking a
picture
Picture orientation is
not accurate
Flash does not fire
Storage location is
almost or entirely full
www.kodak.com/go/support
Possible Solutions
■
Make sure the correct battery type is properly installed and
charged
(page
1).
■
Transfer all pictures to the computer
■
Take another picture. If the problem continues, change the image
storage location to internal memory
■
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
■
Set the Orientation Sensor to ON
■
Check the flash setting, and change as needed
NOTE: The flash does not fire in all modes.
■
Transfer the pictures to the computer
■
Delete pictures from the card or insert a new card.
■
Change the image storage location to internal memory
(page
32).
(page
43).
(page
32).
(page
34).
(page
(page
43).
9).
55