Using The Optical Zoom - Kodak EasyShare V610 User Manual

Using the optical zoom

When taking pictures/videos, use optical zoom to get up to 10X closer to your subject.
Optical zoom is effective when the lens is no closer than 24 in. (60 cm) to the subject
or 2 in. (5 cm) in Macro mode.
LCD zoom indicator
D
Digital zoom range
T
Optical zoom range
Lens transition
W
Using digital zoom
Use digital zoom in any Still mode to get up to 4X magnification beyond optical zoom.
1 Press Telephoto (T) to the optical zoom limit (10X). Release the button, then
press it again.
2 Take the picture.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when
using digital zoom. The slider on the zoom indicator turns red when the picture quality reaches the
limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
www.kodak.com/go/support
1 Use the LCD to frame your subject.
2 Press Telephoto (T) to zoom in. Press Wide Angle
(W) to zoom out.
The zoom indicator shows zoom status. The Lens
Transition icon indicates when the camera transitions
from one lens to another.
3 Take the picture/video.
Taking pictures/videos
7