Kodak EasyShare V610 User Manual page 63

Computer/connectivity problems
Status
Computer does not
communicate with
the camera
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Bluetooth problems
Light status
Camera cannot
communicate with
another device.
Bluetooth status lights
flash in succession
Bluetooth status lights
flash in unison
Lights are off
www.kodak.com/go/support
Possible Solutions
■
Insert a charged battery
■
Turn on the camera.
■
Make sure the USB cable model U-8 is connected to the camera
and the computer
all cable connections. Make sure the camera is seated on the
dock.)
■
Make sure EasyShare software is installed
■
See Help in EasyShare software.
■
Adjust the camera Video Out setting (NTSC or PAL,
■
Make sure the external device settings are correct. (See the
device's user's guide).
Cause
■
Make sure the antenna is not obscured, and the camera is
properly set up. (See
features, page
■
Make sure the external device settings are correct. (See the
device's user's guide).
The camera's Bluetooth radio is on; the camera is connecting to
another device.
The camera's Bluetooth radio is on; the camera is sending/receiving.
The camera's Bluetooth radio is off; the camera is unable to
send/receive Bluetooth signals.
(page 1).
(page 44). (If using an EasyShare dock, check
Using Bluetooth wireless technology
48.)
Troubleshooting
(page 43).
page 33).
57