D-Link AirPremier DWL-1000AP+ Manual page 21

Using the Configuration Menu
Tools > System
Save Settings: The current system settings can be saved as a file onto the local hard
drive.
Load Settings: The saved file or any other saved setting file can be loaded back on the
Access Point. To reload a system settings file, click on
hard drive and locate the system file to be used. Click
the file to be loaded back onto the
Restore: You may also reset the Access Point back to factory settings by clicking on
Restore. Make sure to save the unit's settings before clicking on Restore.
Access Point.
Browse to browse the local
Load when you have selected
21