Radius Server - D-Link AirPremier DWL-1000AP+ Manual

Using the Configuration Menu
Advanced > 802.1x
Disabled
is the default selection for 802.1x protocol. Select
Encryption Key:
Lifetime:
Select 5, 15, 30 minutes, or 1or 8 hours, or 1 day for the authentication
period. After this period expires, a new key will automatically be generated.

Radius Server 1

IP:
Enter the IP Address of the Radius Server
Port:
Enter the port number that your Radius Server uses for Authentication.
The default setting of 1812 is the port setting for many Radius Servers
Shared Secret:
same as the shared secret on your radius server.
Radius Server 2:
same information as shown above.
Select the key length, either 64 bits or 128 bits.
Enter the Shared Secret. The shared secret must be the
Optional. If you have a second radius server, you will input the
Enabled to enable it.
19