D-Link AirPremier DWL-1000AP+ Manual page 15

Using the Configuration Menu
Home > DHCP
DHCP Server:
Select Enabled or Disabled. Disabled is the default setting. If
you want to use the Access Point as a DHCP server to automatically assign Dynamic
IP Addresses on the network, you will select Enabled.
Starting IP Address:
If you have enabled the DHCP server function, enter the
starting point of the IP Address range for your network
Ending IP Address:
Enter the ending IP Address of your IP Address range, if you
have enabled the DHCP function of the Access Point
Lease Time:
Choose the length of time at which the DHCP function of the DWL-
1000AP+ automatically regenerates the IP Addresses to the devices in your network
DHCP Client Table:
Lists the devices on your network that are receiving dynamic
IP Addresses from the Access Point
15