Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
This product can be set up using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 6.2.3.
Before You Begin
It's best to use a computer (with an Ethernet adapter) that is connected to a switch for
configuring the DWL-1000AP+. The default IP address for the DWL-1000AP+ is
192.168.0.50
with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the DWL-1000AP+'s IP address
for the purpose of configuring the DWL-1000AP+. See the Manual on the CD-ROM if
you need assistance in assigning a Static IP address for your network adapter.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DWL-1000AP+. 12062002
DWL-1000AP+ Wireless Access Point
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
5V 2.0A DC Power Adapter
2
DWL-1000AP+
D-Link AirPremier
Wireless Access Point
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
TM
Advertisement
Table of Contents
Related Manuals for D-Link DWL-1000AP+
Summary of Contents for D-Link DWL-1000AP+
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-1000AP+. 12062002... - Page 2 Connecting The DWL-1000AP+ Wireless Access Point To Your Network First, connect the power adapter to the receptor at the back panel of the DWL-1000AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation.
-
Page 3: Using The Setup Wizard
When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. - Page 4 Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next...
- Page 5 Step 1 - Set up your password. You have the option to establish a password. Click Next Step 2 Wireless Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network.
- Page 6 Your Setup is Complete! Click Restart Click Close...
- Page 7 To enable 802.1x on the DWL-1000AP+, please refer to the manual for additional information • For managing several DWL-1000AP+s, please utilize the D-Link Air Premier Access Point Manager. For the latest version of the firmware or AP manager please go to http://support.dlink.com...
-
Page 8: Technical Support
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone.
Need help?
Do you have a question about the DWL-1000AP+ and is the answer not in the manual?
Questions and answers