D-Link AirPremier DWL-1000AP+ Manual page 18

SSID Broadcast:
broadcast of the SSID name across the network. SSID is a name that
identifies a wireless network. All devices on a network must use the same
SSID to establish communication.
Client Security:
that the wireless clients will be secure and their files and folders will not be
available to other wireless clients
Antenna selection:
selection. By choosing which antenna is active, you can more selectively
configure your network.
Antenna transmit power:
desire for your AP transmission. If you do not want the signal to range too far,
you can limit the distance with this tool. This may be helpful in securing your
network.
Using the Configuration Menu
Advanced> Filters
Use MAC Filters
ing the DWL-1000AP+. You can either manually add a MAC address or select the
MAC address from the list of clients that are currently connected to the Broadband
Router. The default setting is
MAC Filter List:
filter
(Service Set Identifier) Enable or Disable (default) the
Disabled is the default setting. Enabling this setting ensures
Choose Left, Right or Diversity. Diversity is the default
Default is the default setting. Select the range you
to allow or deny computers by their MAC addresses from access-
Disabled MAC
This list will display the MAC addresses that are in the selected
Filters.
18