Inserting The Batteries Into The Remote Control; Setting The Time - Sony MHC-VX777 Operating Instructions Manual

Hooking up the system (continued)
When carrying this system
Do the following to protect the CD mechanism.
1
Make sure that all discs are removed from
the unit.
2
Hold down CD and then press ?/1 until
"LOCK" appears.
3
Release ?/1 first, then release CD.
4
Unplug the AC power cord.
Inserting the batteries
into the remote control
Using the remote
To Press
TV ?/1.
Turn the TV on
or off
Switch the TV's TV/VIDEO
video input
Change the TV
TV CH +/–
Channel
Adjust the volume TV VOL +/–
of the TV speaker
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
8
03GET_MHC-VX777/VX555.p65 GB

Setting the time

1
2
3
4
5
6
7
8
AA (R6)
batteries
Tip
If you have made a mistake or want to change the
time, start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
8
MHC-VX777/VX555/VX555J 4-232-651-12 (1)
Turn on the system.
Press CLOCK/TIMER SET on the
remote.
When you set the time for the first time,
proceed to step 5.
Press cursor V/v repeatedly to select
CLOCK SET.
Press ENTER.
Press cursor V/v repeatedly to set the
hour.
Press ENTER.
Press cursor V/v repeatedly to set the
minute.
Press ENTER.
The clock starts working.
13/03/2001, 4:57 PM