Messages; Precautions - Sony MHC-ECL99BT Operating Instructions Manual

Messages

DISC ERR
You have loaded a disc that cannot be
played.
ERROR
You cannot transfer music to the USB
device because the USB device is
write-protected or the memory of the
USB device is full.
FULL
You tried to program more than 64
tracks or files (steps).
NO FILE
There are no playable files on the
CD-R/CD-RW discs or on the USB
device.
NO STEP
All of the programmed steps have
been erased.
NO USB
No USB device is connected or an
unsupported USB device is connected.
PLAY SET
You tried to select the timer when the
Play Timer is not set.
PLS STOP
You pressed PLAY MODE/TUNING
MODE during playback.
SELECT
You pressed TIMER MENU during timer
operation.
TIME NG
The Play Timer start and end times are
set to the same time.
34
GB

Precautions

Discs that this system CAN play
ˎ Audio CD
ˎ CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
ˎ CD-ROM
ˎ CD-R/CD-RW other than those recorded in
music CD format, conforming to ISO9660
Level 1/Level 2
ˎ CD-R/CD-RW recorded in multisession
that have not ended by "closing the
session"
ˎ CD-R/CD-RW of poor recording quality,
CD-R/CD-RW that have scratches or are
dirty, or CD-R/CD-RW recorded with an
incompatible recording device
ˎ CD-R/CD-RW which is finalized incorrectly
ˎ Discs containing files other than MPEG 1
Audio Layer-3 (MP3) files
ˎ Discs of non-standard shape (for example,
heart, square, star)
ˎ Discs that have adhesive tape, paper, or
sticker attached to them
ˎ Rental or used discs with attached seals
where the glue extends beyond the seal
ˎ Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
ˎ Before playing, wipe the disc with a
cleaning cloth from the center outward to
the edge.
ˎ Do not clean discs with solvents, such as
benzine, thinner, or commercially available
cleaners or anti-static spray intended for
vinyl LPs.
ˎ Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave them in a car parked in direct
sunlight.
On safety
ˎ Completely disconnect the power cord
(mains lead) from the wall outlet (mains) if
it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
ˎ Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
ˎ The AC power cord can be changed only
by a qualified service facility.