Using Exposure Compensation To Adjust Picture Brightness - Kodak EASYSHARE Z1275 Extended User Manual

Doing more with your camera
Using exposure compensation to adjust picture
brightness
In P/M and Panorama modes, you can adjust exposure compensation before you take
a picture to make your pictures darker or lighter. Only the first picture in Panorama
mode can be adjusted—that adjustment is applied to the remaining pictures.
1 Press to decrease exposure compensation.
2 Press to increase exposure compensation.
An exposure compensation level between -2.0 and +2.0 is shown on the LCD as the LCD
image gets darker or lighter.
3 Take the picture when you are satisfied with the exposure compensation level.
Using exposure compensation with exposure bracketing
In P/M modes, you can use exposure compensation (see page 37) in conjunction with
exposure bracketing to get the best exposure.
If the exposure And if the exposure bracketing Then the exposures
compensation is set to: interval is set to 0.3 steps: taken are:
0.0 –0.3, 0.0, +0.3
Set the Exposure bracketing in the
+1.0 +0.7, +1.0, +1.3
Setup menu (see page 29).
–1.0 –1.3, –1.0, –0.7
37
www.kodak.com/go/support