Using Burst; Using Exposure Compensation To Adjust Picture Brightness; Using The Framing Grid To Compose A Picture - Kodak EasyShare M1073 IS Extended User Manual

Using burst

Use burst to take up to 4 pictures in rapid succession.
until the Burst icon
Press
appears in the LCD status area.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see
Using exposure compensation to adjust picture
brightness
Before you take a picture, you can adjust exposure compensation to make pictures
darker or lighter. (Available only in some modes.)
Press
I
I Press
The exposure compensation level is shown on the LCD and the image gets darker or lighter.

Using the framing grid to compose a picture

The framing grid divides the LCD into thirds—vertically and horizontally. This is
helpful if, for example, you want to balance a picture between water, earth, and sky.
www.kodak.com/go/support
Downloaded From camera-usermanual.com Kodak Manuals
1 In most Still modes, press the
2 Press the Shutter button halfway to focus and set
3 Press the Shutter button completely down and
page 17). Burst is not available when shutter speeds are longer than 0.5 seconds.
to decrease exposure compensation.
to increase exposure compensation.
Doing more with your camera
until appears on the LCD.
exposure.
hold it to take pictures.
The camera stops taking pictures when you release the
Shutter button, when the pictures are taken, or when
there is no more storage space.
To turn on/off the framing grid, press
repeatedly.
button repeatedly
button
35