Using The Self-Timer - Kodak EASYSHARE Z1275 Extended User Manual

Taking pictures/videos

Using the self-timer

Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press.
To cancel the Self-timer before the picture is taken, press the Self-timer/Burst button
, or press the Shutter button completely down.
Use the same procedure to use the self-timer in Video mode, but:
■ Turn the Mode dial to Video
Press the Shutter button completely down.
■
NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in
video mode.
10
Place camera on a tripod or flat surface.
In most Still modes, press the Self-Timer/Burst button
• Once for a 10-second delay (so you have time to get into the scene)
• Again for a 2-second delay (for a steady, auto-shutter release on a tripod)
• Again for 2-shot (one picture taken after 10 seconds and another picture
taken 8 seconds later)
.
Compose the scene.
Press the Shutter button halfway, then
completely down.
The picture is taken after the delay.
www.kodak.com/go/support
: