Using burst
Use burst to take up to 3 pictures in rapid succession.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see
page
Using exposure compensation to adjust picture
brightness
Before you take a picture, you can adjust exposure compensation to make pictures
darker or lighter.
Press
to decrease exposure compensation.
I
I
Press
to increase exposure compensation.
The exposure compensation level is shown on the LCD; the LCD gets brighter or dimmer.
www.kodak.com/go/support
Downloaded from ManualsCamera.com Manuals
1 In most Still modes, press the
repeatedly until
2 Press the Shutter button halfway to focus and set
exposure.
3 Press the Shutter button completely down and
button
hold it to take pictures.
The camera stops taking pictures when you release the
Shutter button, when the pictures are taken, or when
there is no more storage space.
17). Burst is not available in menu mode.
Doing more with your camera
button
appears on the LCD.
37