Table of Contents
Advertisement
Using wireless streaming
The wireless dongle included in this package provides you with two modes to project
images wirelessly. One is by using "PC Display" while the other is by using "Mobile
Display".
Display PC screen to projector wirelessly (PC Display)
BenQ EZ QPresenter 2.0 for PC is a powerful program that allows you to project your
computer screen with this projector via wireless connection. It also brings you extension
display function so that you can show different contents in the secondary display.
If you are using PC Display function for the first time, you need to download "BenQ EZ
QPresenter 2.0" application from GP30 and install it on your computer prior to using
this function. Follow the steps below to get your projector set up in just a few minutes.
1.
Connect the wireless dongle to the USB jack of the projector.
2.
Go to Settings > Network > Wi-Fi Mode to check your network settings.
i. GP30 Wi-Fi mode is set to AP Mode as the default mode. Open your
computer's wireless network and search for "BenQ GP30" (Device Name
SSID) in wireless access point menu and connect to it.
ii. If GP30 Wi-Fi mode is set to Client Mode, you should connect both your
computer and GP30 to the same Wi-Fi network.
(See
3.
Select "USB Drive/Wireless Streaming" by pressing
your projector or remote control. Choose "PC Display".
58
Operation
"Setting up Wi-Fi Network" on page 69
for details on Wi-Fi connection)
/
and press "OK" on
Advertisement
Table of Contents
