Table of Contents
Advertisement
Using Wall Color
In the situation where you are projecting onto a colored surface such as a painted wall
which may not be white, the Wall Color feature can help correct the projected picture's
color to prevent possible color difference between the source and projected pictures.
To use this function, press
iPad, composite video, component and HDMI/MHL modes. Select Wall Color and press
/
to select a color which is closest to the color of the projection surface. There are
several precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and
Blackboard.
Fine-tuning the image quality in User mode
According to the detected signal type, there are some user-definable functions available
when User mode is selected. Based on your needs, you can make adjustments to these
functions by highlighting them and pressing
Adjusting Brightness
The higher the value, the brighter the image. And the
lower the setting, the darker the image. Adjust this
control so the black areas of the image appear just as
black and that detail in the dark areas is visible.
Adjusting Contrast
The higher the value, the greater the contrast. Use this
to set the peak white level after you have previously
adjusted the Brightness setting to suit your selected
input and viewing environment.
Adjusting Color
Lower setting produces less saturated colors. If the setting is too high, colors on the image
will be overpowering, which makes the image unrealistic. Color is only adjustable under
analog video sources such as composite video and component video sources.
Adjusting Tint
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes. Tint is only adjustable under video and S-video
sources with video signal in NTSC or SECAM format.
Adjusting Sharpness
The higher the value, the sharper the picture becomes. The lower the value, the softer the
picture becomes. Sharpness is only adjustable under analog video sources such as
composite video and component video sources.
Selecting a Color Temperature
There are a number of options available for color temperature* settings which vary
according to the signal type selected.
*About color temperatures:
There are many different shades that are considered to be "white" for various purposes.
One of the common methods of representing white color is known as the "color
temperature". A white color with a low color temperature appears to be reddish white. A
white color with a high color temperature appears to have more blue in it.
36
Operation
to open the pop-up menu in one of the computer, iPhone/
/
on the projector or remote control.
+30
+30
+70
+50
0
-30
Advertisement
Table of Contents
