Table of Contents
Advertisement
Connecting to a network using Client Mode
1.
Go to Settings> Network> Wi-Fi Mode, press OK and a pop-up menu appears.
Select Client Mode and press OK.
2.
Press
name it is connected to. If no connection is found, a pop-up menu will appear.
3.
From the pop-up menu, select the desired AP and press OK.
4.
Follow OSD directions and set encryption code. (Only if Security is enabled)
5.
Press
70
Operation
to select Wi-Fi Connection and press OK. The screen will display the AP
or
to leave Network and back to projector home screen.
Advertisement
Table of Contents
