Navigation - Kestrel 4000 Instruction Manual

Kestrel 4000 Pocket Weather
®
entering the date and time, press the
again to exit the Main Setup Menu.

NAVIGATION

Measurements use
Wind Speed
Temperature
Wind Chill
Humidity
HI
Heat Index
DP
Dew Point
WB
Wet Bulb
Barometric Pressure
Altitude
D
Density Altitude
Tracker
®
button to exit the Date/Time Setup. Then press the
The Kestrel 4000 is set up to display 10 Measurements (some are
calculations) in 3 Modes.
The Measurements are listed here with their corresponding screen
icon. In addition to these Measurements and Modes, there are also 3
and
User Screens, which simultaneously show 3 current measurements,
and the Date & Time Screen, which gives the current date and
time. Use the
Measurements, followed by the 3 User Screens and the Date/Time
Screen. Any of these screens can be turned off so that you can
customize your Kestrel Meter to show the screens that your application
requires. (See the Measurements section in the Main Menu.)
The Modes are displayed below. Use the
through the various Modes. From any mode, you may still scroll to a
different Measurement by pressing the
Current - Displays the instantaneous reading.
Min/Max/Avg - Displays the Minimum/Maximum/Average readings
from stored data. If there is no stored data, the values will be
displayed as --.-.
Chart - Displays a graphical representation of up to 2000 stored
data points for each measurement. If there is no stored data, the axis
will appear, but the chart will be blank. (See the following section
for information on Chart Navigation.)
and buttons to scroll through the various
button
and buttons to scroll
and buttons.