Kestrel 4000 Instruction Manual page 15

that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the
same manner as all other measurements, as specified in the Store Rate.
Graph Scale
These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and
upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight
the desired measurement by pressing the
pressing the button. Press the
or button to change between the upper and lower limits. Press the
Measurement Selection screen. Press the
Wind Speed
m/s meters per second
km/h kilometers per hour
kt knots
mph miles per hour
ft/m feet per minute
Bft Beaufort
or
or button to increase or decrease the value of the limits. Press the
button to return to the Main Setup Menu.
Temperature, Dewpoint,
Wet Bulb Temp, Wind Chill &
Heat Index
°C Celsius
°F Fahrenheit
button. Select the highlighted measurement by
Pressure
InHg inches
mercury
HPa hectopascals
psi pounds per
square inch
mb milibar
button to exit and return to the
Altitude,
Density
Altitude
m meters
ft feet
15