Kestrel 4000 Instruction Manual page 16

Kestrel 4000 Pocket Weather
®
Units
The units of measure can be adjusted to best suit the application. The following units are available:
Highlight the desired measurement by pressing the
through the available units. Press the
User Screens
The three User Screens can be reconfigured to display the most appropriate information for your
application. For example, if you need to monitor the wind speed, humidity and barometric pressure, a User
Screen can display these current measurement values on the same screen for quick reference. Only current
measurements can be selected for the User Screens - Min/Max/Avg and Charts are not available.
From the Main Setup Menu, highlight the desired User Screen by pressing the
button to select the highlighted User Screen. Press the
button to scroll through the available measurements for each highlighted line. Press the
return to the User Screen Setup Menu. Repeat above process for the other User Screens or press the
button to return to the Main Setup Menu. The User Screens may also be hidden if not needed.
System
The display Contrast and Auto Shutdown can be reconfigured as required. The relative humidity and
pressure sensors can also be recalibrated. Press the
and the or button to adjust or select.
The Contrast can be adjusted for better visibility depending on the ambient lighting conditions. Press the
or button to increase or decrease the contrast from 0 to 20 (0 is lightest, 20 is darkest).
The display can be set to automatically turn off in order to conserve the battery life. Auto Shutdown will
only occur after the preset time has elapsed without any button presses. Press the
through the Auto Shutdown options (15 minutes, 60 minutes, Off ). Battery life will be shortened if the Auto
Shutdown is turned to Off.
Tracker
®
or button. Press the
button to return to the Main Setup Menu.
or
or buttons to highlight the appropriate selection,
or button to scroll
or button. Press the
buttons to change lines, and the
or
or
button to
button to scroll