Screen Navigation; Measurement Screens; Measurement Modes; Max / Avg Functions - Kestrel 4000 Instructional Manual

sCREEn naVIGatIOn

mEASUREmENT SCREENS

• Press or to scroll through the
Measurement screens.

mEASUREmENT mOdES

• From your chosen Measurement screen, use or
to scroll through the Mode options:
Current: Displays instantaneous reading.
Min/Max/Avg: Displays the Minimum, Maximum, and
Average readings from stored data (Displays --.- if no data
has been stored).
Chart: Displays graph of stored data points for each
measurement.
Current Min/Max/Avg
TEMP F TEMP F
76.4
Min 32.4
Avg 67.9
Max 84.0
to View Chart Data:
• Press while viewing a chart. A cursor will
appear on the most recent data point.
• Press or to scroll through saved data:
56.0 F
Feb 27 16:58:14
Chart
TEMP F
— for data
The data value will be displayed at the top of the
screen. The date and time when each data point was
stored will be displayed at the bottom of the screen.
• Press or to review the chart data for other
measurements.
mAX/AVG FUNCTIONS -
These values are measured independently from
stored and charted data to allow the user to start
and stop the averaging period in the manner
most appropriate for their application. Averaging
on all wind-related values will be started and
stopped together.
to measure these values:
• Press or to scroll to a wind
measurement screen, then use or to select
Min/Max/Avg screen.
• Press to begin collecting data.
• Press again to stop data collection and
display the Maximum and Average values.
This routine will work simultaneously for both
measurements, regardless of which one is displayed when
run. No other Min/Max/Avg or stored data will be affected.
• To clear data, press
"— clear".
Other measurements will display min / max / avg data
WINd SPEEd & WINd CHILL
when the screen says
11