Onkyo TX-SR505 Instruction Manual page 58

Advanced Setup —Continued
Double Bass
This setting is not set automatically by the Automatic
Speaker Setup function (see page 35).
With the Double Bass function, you can boost bass out-
put by feeding bass sounds from the front left and right
channels to the subwoofer. This function can be set only
if the Subwoofer setting (step 3) is set to Yes, and the
Front setting (step 4) is set to Large in the Speaker Con-
figuration on page 56.
10
Use the Down [
select "Double Bass," and then
use the Left and Right [
buttons to select:
On: Double Bass function on.
Off: Double Bass function off.
11
Press the [SETUP] button.
Setup closes.
SETUP
Note:
• These settings cannot be changed while headphones
are connected, speaker set B is on, or the multichannel
DVD input is being used.
58
] button to
]/[ ]
Bass from the front left and
right channels is also fed to
the subwoofer (default).
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 35).
With these settings, you can specify the distance from
each speaker to the listening position.
1
Measure and make a note of the
distance from each speaker to
the listening position.
2 Press the [RECEIVER] REMOTE
RECEIVER
MODE button, followed by the
[SETUP] button.
SETUP
3
Use the Up and Down [
buttons to select "Sp Distance,"
and then press [ENTER].
4 While "Unit" is displayed, use the
Left and Right [
select "feet" or "meters".
feet: Distances can be set in feet.
Range: 1 to 30 feet in 1-foot
steps.
meters: Distances can be set in
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
5
Use the Down [
select "Front," and use the Left
and Right [
specify the distance for the front
speakers, then press the Down
[ ] button to select the next
speaker.
6
Repeat step 5 for all speakers.
Note:
Speakers that you set to No or None in
the Speaker Configuration (page 56)
cannot be selected.
]/[ ]
]/[ ] buttons to
] button to
]/[ ] buttons to