Visonic MR-4000 Installation Instructions

055
Flush Mount PIR Detectors
,1752'8&7,21
The MR-4000 (vertical unit) and MR-4000R (horizontal unit) are
flush mounted PIRs for wired installations. They fit into virtually
any standard single-gang electrical box, but may also be installed
directly into the wall without a box or a special installation kit.
Superior engineering gives you these added features:
• Flush mounting in a standard
electrical box
• Ideal for pre-wired installations
• 145
S ultra-wide angle lens
• Super RFI protection
• Virtually zero false alarms
Maximum coverage: Maximum coverage:
13.5 m (45 ft) radius/90
10 m (30 ft) radius/145°
Application: provides the Application: general use -
largest and widest room high density coverage.
coverage for general-
purpose applications.
(Standard Lens)
Figure 2
Lens No. 4, Ultra-Wide Lens No. 1, Wide-Angle
63(&,),&$7,216
OPTICAL
Standard Lens: Lens No. 4 is the standard pattern supplied with
each MR-4000. It provides 34 beams in 3 detection layers, 145°
ultra-wide angle, maximum coverage area of 9 m (30 ft) radius.
Interchangeable Lenses (same as used with MR-3000 series):
Lens No. 1 - Wide-Angle 90 S , 13.5 m (45 ft) radius.
Lens No. 2 - Long-Range, 27 m x 3 m (90 ft x 10 ft)
Lens No. 3 - Triple curtain, 9 m (30 ft)
Lens No. 5 - Pet Alley, 90 S , 15 m (50 ft) radius.
Calibration: 0° to -12° (vertical); ±7.5° (horizontal)
ELECTRICAL
Voltage: 9 to 16 VDC.
Current Drain: 25 mA.
Relay Output: Normally Closed (fail safe) contacts. 18-ohm
resistor in series with contacts. Rating - 0.1 A resistive /30 VDC.
Alarm Period: 2-3 seconds.
Pulse Counter: Selectable 1 or 3 pulse operation.
Tamper Contacts (optional): N. C., 0.5 A resistive / 30 VDC.
LED: Switchable ON or OFF.
Detector: Dual-element low-noise pyroelectric sensor.
DE1141
• Interchangeable lenses
• 12
S
vertical and horizontal
adjustment
• Programmable pulse counter
• Plug-in wiring connector
• Entirely sealed construction
Max. coverage: 9 m (30 ft) / 90
Application: 3 vertical "finger
curtains" which may be used as
S
3 individual traps within the
protected area. The coverage of
each curtain should be walk-
tested-separately.
NOTE! A wide dead zone exists
between the curtains.
Figure 3
Lens No. 3, Triple Curtain

Installation Instructions

The MR-4000 provides a variety of
outstanding features
adjustable pulse counter and RFl
protection up to 1000 MHz, to
ensure the highest level of reliability
and false alarm immunity along with
added flexibility.
User-friendly design includes instal-
lation aids for precise positioning at
the desired height.
S
.
Maximum coverage:
15 m (50 ft) radius/90
Application: allows pets to
move freely under coverage
pattern, undetected.
Mounting Height:
0.8 to 1.5 m (2.5 to 5 ft)
Figure 4 Figure 5
Lens No. 5, Pet Alley
MOUNTING
Flush mounted into virtually any standard single-gang electrical
box or installed directly into the wall (without box).
ENVIRONMENTAL
Operating Temperature: -10
Storage Temperature: -20
RFl Protection: No alarm when tested on 21 different
frequencies from 20 to 1000 MHz with 124 Watt radio transmitter
at 3 m (10 ft) distance (equivalent to field strength of 20 V/m).
PHYSICAL
Dimensions: 125 x 85 x 48 mm (5 x 3.3 x 1.9 in.).
Weight: 90 g (3 oz).
Color: Soft white.
MODELS AVAILABLE
MR-4000: Standard model for vertical mounting.
MR-4000R: For horizontal mounting.
ACCESSORIES:
TS-1: Tamper switch module.
MRB-403: Standard single-gang back box.
including
Figure 1. Model MR-4000
for Vertical Installation
Maximum coverage:
27 x 3 m (90 x 10 ft)
Application: corridors
long walls.
Mounting Height:
0.8 to 1.2 m (2.5 to 4 ft)
Beam Splitting: By
S
. element detector that creates
two detection zones for each
segment in the lens array,
doubling the number of detec-
ting beams in the coverage
pattern .
Figure 6
Lens No. 2, Long-Range
S C to 50 S C (14 S F to 122
S C to 60 S C (-4 S F to 140 S F).
and
dual-
S F).
1