Table of Contents
Advertisement
Troubleshooting
Computer/connectivity problems
Status
Computer does not
communicate with
the camera
Pictures do not
transfer to computer
Slide Show does not
run on an external
video device
Picture quality problems
Status
Picture is not clear
40
Solution
Insert a charged battery
Turn on the camera.
Make sure the proper USB cable is connected on camera and
computer port
cable connections. Make sure the camera is seated on the dock.)
Make sure the EasyShare software is installed
Click the Help button in the EasyShare software.
Adjust the camera Video Out setting (NTSC or PAL,
Make sure the external device settings are correct (see the device's
user's guide).
Solution
To automatically set exposure and focus, press the Shutter button
halfway. When the Ready light turns green, press the Shutter button
completely down to take the picture.
Clean the lens
(page
Make sure camera is not in Close-up mode if you are more than 21
in. (0.7 m) from your subject.
Place the camera on a flat, steady surface or use a tripod, especially
in high-zoom settings or in low light.
(page
1).
(page
12). (If using an EasyShare dock, check all
52).
www.kodak.com/go/support
(page
11).
page
27).
Hide quick links:
Advertisement
Table of Contents
