Kodak EasyShare C360 User Manual page 30

Doing more with your camera
Setting
Exposure Metering
Evaluate light levels at
specific areas of a scene.
This setting remains until you
turn the Mode dial.
ISO Speed
Control the sensitivity of the
camera sensor.
This setting remains until you
turn the Mode dial.
Focus Zone
Select a large or concentrated
area of focus.
This setting remains until you
turn the Mode dial.
AF Control
Choose an auto-focus setting.
This setting remains until you
change it.
24
Icon Options
Multi-pattern (default)—evaluates lighting
conditions throughout the image to give an optimum
picture exposure. Ideal for general picture taking.
Center-weight—evaluates the lighting conditions of
the subject centered in the viewfinder. Ideal for backlit
subjects.
Center-spot—similar to Center-weight, except the
metering is concentrated on a smaller area of the
subject centered in the viewfinder. Ideal when you need
an exact exposure of a specific area in the picture.
Auto (default)
ISO
ISO 80, 100, 200, 400, 800
Multi-zone (default)—evaluates 3 zones to give an
even picture focus. Ideal for general picture taking.
Center-zone—evaluates the small area centered in
the viewfinder. Ideal when precise focus of a specific
area in the picture is needed.
NOTE: For the best pictures, the camera is set to Multi-zone
when in Landscape mode.
Continuous AF—uses external AF sensor and TTL
(Through The Lens) AF. Because the camera is always
focusing, there is no need to press the Shutter button
halfway down to focus.
Single AF (default)—uses external AF sensor and
TTL-AF when the Shutter button is pressed halfway
down.
www.kodak.com/go/support