Changing The Flash Settings - Kodak EasyShare C360 User Manual

Zoom digital camera
Table of Contents

Advertisement

Changing the flash settings

Flash modes
Auto
Flash
Fill
Red-
eye
Off
For flash settings in each mode, see
NOTE: Rear-curtain-flash sync (a feature found only in Night Portrait mode) activates automatically when
the flash is fired and the shutter speed is set at 1/30 second or longer. The flash fires just before the
shutter closes to create a stream-of-light effect behind a moving object for a more natural
appearance.
www.kodak.com/go/support
Press the flash button repeatedly to scroll through flash modes.
The current flash mode is shown in the LCD status area.
Flash fires
When the lighting conditions require it.
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is "backlit" (when the sun is behind the
subject). In low light, hold the camera steady or use a tripod.
If the Red-eye Pre-flash
feature is turned off:
The flash fires once.
The camera then
automatically corrects
red-eye in the picture.
To turn the Red-eye Pre-flash feature on/off, see
page
27.
Never
Doing more with your camera
If the Red-eye Pre-flash feature is turned on:
The flash fires once so the eyes become
accustomed to the flash, then fires
again when the picture is taken.
The camera then automatically corrects
red-eye in the picture.
page
47.
Red-eye Pre-flash,
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents