Table of Contents
Advertisement
Status
Flash does not fire
Storage location is
almost or entirely full
Battery life is short
You cannot take a
picture
Error message
appears on LCD
Memory card not
recognized or camera
freezes with card.
www.kodak.com/go/support
Solution
Check the flash setting and change as needed
NOTE: The flash does not fire in all modes.
Transfer pictures to the computer
the card
(page
10) or insert a new card.
Change image storage location to internal memory
Make sure the correct battery type is installed
Wipe the contacts with a clean, dry cloth before inserting a battery
in the camera.
Insert a new or charged battery.
Turn the camera off, then on again. Make sure the camera is not in
Favorites mode.
Depress shutter button all the way
Insert a new or charged battery
Wait until the Ready light turns green before attempting to take
another picture.
Memory full. Transfer pictures to the computer
pictures
(page
10), change image storage location, or insert
another card.
Turn the camera off, then on again.
Remove memory card from the camera.
Remove the battery and wipe the contacts with a clean, dry cloth.
Insert a new or charged battery
If problem still exists, get help
Card may be corrupted. Format card in camera
Use another memory card.
Troubleshooting
(page
(page
11). Delete pictures from
(page
(page
4).
(page
1).
(page
(page
1).
(page
43).
(page
17).
(page
25).
1).
11), delete
28).
39
Hide quick links:
Advertisement
Table of Contents
