Table of Contents
Advertisement
7
Troubleshooting
When you have questions about your camera, start here. Additional technical
information is available in the ReadMe file located on the Kodak EasyShare
software CD. For updates to Troubleshooting information, see
www.kodak.com/go/dx7630support.
Camera problems
If...
The camera does not
turn on
The camera does not
turn off and the lens
does not retract
Camera buttons and
controls do not
function
The camera screen
does not turn on
In Review, a blue or
black screen is
displayed instead of a
picture
The pictures
remaining number
does not decrease
after taking a picture
Picture orientation is
not accurate
Flash does not fire
Battery life is short
44
Try one or more of the following
■
Remove, then reinsert the battery.
■
Insert a charged battery.
■
Place the camera on a Kodak EasyShare camera or printer
dock (sold separately), then try again.
■
Connect the camera to a Kodak 5-volt AC adapter (sold
separately), then try again.
See
page 2
for more battery information.
■
In any capture mode, press the Display/Info button.
■
Turn the camera off, then on again.
To change the camera screen setting so that it is on whenever
the camera is on, see
■
Transfer the picture to the computer.
■
Transfer all pictures to the computer.
See
page
42.
■
Continue taking pictures. The camera is operating
normally.
(The camera estimates the number of pictures remaining after
each picture is taken, based on picture size and content.)
■
Set the Orientation Sensor
■
Check flash setting, and change as needed
■
Wipe the contacts with a clean, dry cloth
inserting a battery in the camera.
■
Insert a charged battery
Liveview (Auto), page
(page
26).
(page
2).
24.
(page
16).
(page
3) before
Hide quick links:
Advertisement
Table of Contents
