Using The Flash - Kodak EasyShare DX7630 User Manual

Taking pictures and videos

Using the flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy
shadows. You can change the flash setting in any Still mode; the default flash
setting is restored when you exit the mode or turn off the camera.
Turning on the flash
Press the
through the flash options.
The active flash icon is displayed
in the camera screen status area.
Flash Setting
Auto
Flash
Off
Fill
Red-eye Once, so the subject's eyes become accustomed to the flash,
NOTE: The flash is not available in all modes. See
16
Flash Range
Wide Angle 2-13.8 ft (0.6-4.2 m)
Telephoto 2-8.2 ft (0.6-2.5 m)
button to scroll
Flash Fires
When the lighting conditions require it.
Never
Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is "backlit"
(when the sun is behind the subject). In low light, hold the
camera steady or use a tripod.
then fires again when the picture is taken. (If the lighting
conditions require flash but do not require Red-eye reduction,
the flash may fire only once.)
Flash/Status
Flash settings in each mode, page 17.