If...
You cannot take a
picture
Computer/connectivity problems
If...
The computer does
not communicate with
the camera
Slide Show does not
run on an external
video device
Picture quality problems
If...
The picture is too dark
or underexposed
Try one or more of the following
■
Turn the camera off, then on again.
■
Depress shutter button all the way
■
Insert a charged battery
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
7).
Try one or more of the following
■
Turn on the camera.
■
Insert a charged battery
■
Make sure USB cable is securely connected on camera and
computer port
(page
■
Make sure the EasyShare software is installed
■
Adjust the camera Video Out setting (NTSC or PAL,
page
26).
■
Make sure the external device settings are correct (see the
device's user's guide).
Try one or more of the following
■
Use Fill flash
(page
not behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range
■
To automatically set exposure and focus, press the Shutter
button halfway and hold. When the ready light glows
green, press the Shutter button the rest of the way
down to take the picture.
■
Decrease the shutter speed or increase the ISO speed
(page
14).
(page
2).
(page
(page
29), switch image storage
24), or insert a card with available
(page
2).
42).
16) or change your position so light is
(page
Troubleshooting
(page
8).
42), delete
(page
35).
16).
45