Changing To Radio Mode; Select Memory Bank; Tuning Into A Station; Storing Stations Or Calling Stored Station - Blaupunkt NEW JERSEY 220 BT Operating And Installation Instructions

Changing to radio mode

u Press the SRC
button
"TUNER" is displayed:
Playback starts with the station that was
played most recently.

Select memory bank

u Press the BAND/TS button
until the desired memory bank is displayed:
FM1 FM2 FM3
Note:
Up to 6 stations can be stored in each mem-
ory bank.

Tuning into a station

There are various ways of tuning into a station:
Tuning into stations manually
u Briefl y press the / button
several times to incrementally change the
frequency.
Starting station seek tuning
u Press the / button
onds to start station seek tuning.
The radio tunes into the next receivable
station.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only traffi c information stations
are tuned into if the priority for traffi c infor-
mation is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "DX/LO").
3
repeatedly until
7
repeatedly
AM1 AM2
=
once or
=
for approx. 2 sec-
Storing stations or calling stored
station
u Select the desired memory bank.
u If necessary, set the desired station.
u Press the station button 1 - 6
2 seconds to store the current station under
the button.
- or -
u Briefl y press the station button 1 - 6
call up the stored station.

Scanning stations

The scan function enables scanning the stored
stations of the current waveband.
u Press the MENU button
onds to start scanning.
During the scan, the display shows the mem-
ory location and the current frequency or
station name.
u Briefl y press the MENU button
tinue listening to the station that is currently
being scanned.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for
and store all receivable the stations in the FM and
AM wavebands. Any stations that were previously
stored are deleted in the process.
u Select the desired waveband, e.g. FM1 or
AM1.
u Press the BAND/TS button
2 seconds.
The tuner starts the automatic station seek
tuning; the display shows "TS". After storing is
completed, the stored stations are scanned in
the order of the storage locations. Afterwards,
the station in memory location 1 of the FM1 or
AM1 level is played back.
Radio mode
<
for approx.
<
to
1
for approx. 2 sec-
1
to con-
7
for approx.
7