Bluetooth® Streaming Mode; External Audio Sources; Front Aux-In Socket; Sound Settings - Blaupunkt NEW JERSEY 220 BT Operating And Installation Instructions

Bluetooth® mode | External audio sources | Sound settings
u Press the rotary/pushbutton
selected call list.
u Turn the rotary/pushbutton
number.
u Press the 6
button
displayed.
The display shows "DIALLING".
As soon as the party you are calling accepts
the call, the display shows the running talk
time.
Transferring a call
You can transfer a call from the car sound system
to the cell phone.
u Press the 6
button
Note:
Depending on the cell phone, the connection
may be disconnected if you transfer the call
to the cell phone.
Bluetooth® streaming mode
Starting the Bluetooth® streaming mode
u Press the SRC
button
"BTSTREAM" (Bluetooth® streaming) is dis-
played.
u Press the rotary/pushbutton
to start the music playback.
Notes:
• The Bluetooth® streaming mode can be se-
lected only if a suitable streaming device
is connected.
• The volume set for a phone call is adopted
for the playback. The playback can be un-
desirably high if you adjusted the volume
to be high during the last phone call.
Selecting tracks
u Briefl y press the
/
to the previous/next track.
Interrupting playback
u Briefl y press the rotary/pushbutton
interrupt ("PAUSE") or continue playback.
14
>
to open the
>
to select a
<
to call the number
<
to transfer a call.
3
repeatedly until
>
, if necessary,
=
button to change
>
to

External audio sources

Front AUX-IN socket

Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector in
the front AUX-IN socket may cause injuries. The use
of straight plugs or adapters leads to an increased
risk of injury.
For this reason, it is recommended to use angled
jack plugs.
As soon as an external audio source, such as a
portable MP3 player, is connected to the front
?
AUX-IN socket , it can be selected with the
3
SRC button . "AUX" then appears on the
display.

Sound settings

The following sound settings can be changed in
the "AUDIO" menu:
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(Loudness)
• Adjusting the equalizer
Calling and exiting the "AUDIO"
menu
u Press the AUDIO button
"AUDIO" menu.
u Turn the rotary/pushbutton
desired menu item is selected.
u Perform the setting (see the next section).
u Press the AUDIO button
Notes:
• The menu is automatically exited approx.
20 seconds after the last button activation
and you are returned to the display of the
current audio source.
6
to open the
>
until the
6
to exit the menu.