Information Displayed During Normal Operation - eQ-3 MAX! Operating Manual

Electronic wireless radiator thermostat
Hide thumbs Also See for MAX!:
Table of Contents

Advertisement

Available languages

Available languages

closing of a window is detected at the precise time it oc-
curs. Whilst the window is open, the temperature is re-
duced to the factory setting of 12°C. When the MAX!
Window Sensor detects the closing of the window, all
MAX! Radiator Thermostats installed in the room are
immediately reset to their original mode.
The open-window temperature and time can be set
via the MAX! Software. Temperature fall detection
without a MAX! Window Sensor can also be deac-
tivated (by setting the duration to 0 minutes) via the
software.
When a MAX! Window Sensor is taught in, the MAX!
Radiator Thermostat does not react to a temperature
fall.

13. Information displayed during normal operation

The current temperature is displayed during normal opera-
tion, along with the mode. In the exam-
ple on the right, the MAX! Radiator
Thermostat is in automatic mode (Auto)
and the comfort temperature (
21.0°C is set. The antenna symbol
(
) indicates that the connection to the
taught-in component has been established.
In case you use the MAX! Radiator Thermostat in combi-
nation with a MAX! Wall Thermostat, the room tempera-
ture will be measured by the MAX! Wall Thermostat. Thus,
it can be colder or warmer somewhere else in the room.
To adapt the difference, a temperature offset of ±3.5°C can
be set on the MAX! Wall Thermostat or in the software.
40
) of

Advertisement

Chapters

Table of Contents
loading

Table of Contents